Welcome Guest Search | Active Topics | Log In | Register

Ford Shelby Mustang Official Build Diary - Issues 97-100 Options
arpurchase
#1 Posted : 18 November 2017 19:54:06

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding build
Groups: Registered, Moderator, Official Builds, Global Forum Support, Administrators

Joined: 27/09/2011
Posts: 15,108
Points: 45,871
Location: Dudley
Issue 97

Roof interior

Parts supplied:-

Roof interior.



Take the body assembly and the left door. Line the door hinge up with the holes in the body and close the door. Place the body on its side making sure you protect the paint work then use an MD 13 screw provided in issue 96 to fix the door to the body.

Test the fit of the door to the body and adjust if it is needed.

Repeat the above for the right hand door.

You can now test fit the roof lining if you like but do not fit it yet.

Issue complete, carefully store any remaining parts in an issue labelled bag.
arpurchase attached the following image(s):
PB184561.JPG
PB184563.JPG
PB184565.JPG
PB184568.JPG
PB184574.JPG
Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .

arpurchase
#2 Posted : 18 November 2017 19:57:13

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding build
Groups: Registered, Moderator, Official Builds, Global Forum Support, Administrators

Joined: 27/09/2011
Posts: 15,108
Points: 45,871
Location: Dudley
Issue 98

Sun visors and rear view mirror

Parts supplied:-

Right sun visor
Left sun visor
Mirror arm
Mirror
Screws


Take the roof interior from stage 97 and the two sun visors. Take the right sun visor and insert the rod at the wide end into the hole on the edge of the roof then clip the other end into the centre of the roof. Do the same for the left visor and then check they fold back and forwards.

Next take the rear view mirror and insert the mirror arm into the 'D' shaped hole in the mirror rear. Insert the mirror assembly into it mounting hole in the front centre of the roof lining and fix it in place using a MP05 screw.

Line up the roof assembly with the four post holes and fix it in position by pushing on the four posts on the rear of the roof lining.

Issue complete, carefully store any remaining parts in an issue labelled bag.
arpurchase attached the following image(s):
PB184578.JPG
PB184580.JPG
PB184582.JPG
PB184583.JPG
PB184584.JPG
PB184585.JPG
PB184586.JPG
PB184587.JPG
PB184588.JPG
PB184589.JPG
PB184591.JPG
PB184594.JPG
PB184595.JPG
PB184596.JPG
PB184598.JPG
Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .

arpurchase
#3 Posted : 18 November 2017 20:01:20

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding build
Groups: Registered, Moderator, Official Builds, Global Forum Support, Administrators

Joined: 27/09/2011
Posts: 15,108
Points: 45,871
Location: Dudley
Issue 99

Rear skirt and fog lights

Parts supplied:-

Rear fog lights
lenses
Skirt
Screws


Take the body and chassis assembles and place them next to each other making sure the wing mirror is protected from damage. Join cables 07,08,09 and 10 to the sockets on the chassis then and make sure you tuck them into the cable holder. Now take the body and place it onto the chassis working from the rear making sure the fuel tank tube is in its correct place. Tuck any loose wires into the recess between the the engine and dashboard.

Once the body and chassis are correctly lined up turn the assembly over and place two MD14 screws into the two holes under the boot. Next screw four MD06 screws into the central section of the chassis then finally two more MD06 screws into the front of the chassis next to the bumper. Check the doors ,bonnet and boot function correctly.

Now take the fog lights and insert a lens into the front of both parts. Next take the rear skirt and insert a fog light into either fog light holder. When in the correct position use a MP01 screw to hold it in position screwing it in from the back of the skirt. Do the same for the other fog light.

Issue complete, carefully store any remaining parts in an issue labelled bag.
arpurchase attached the following image(s):
PB184607.JPG
PB184608.JPG
PB184611.JPG
PB184613.JPG
PB184614.JPG
PB184616.JPG
PB184617.JPG
PB184618.JPG
PB184624.JPG
PB184627.JPG
PB184628.JPG
PB184630.JPG
PB184632.JPG
PB184633.JPG
PB184636.JPG
PB184637.JPG
Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .

arpurchase
#4 Posted : 18 November 2017 20:06:49

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding build
Groups: Registered, Moderator, Official Builds, Global Forum Support, Administrators

Joined: 27/09/2011
Posts: 15,108
Points: 45,871
Location: Dudley
Issue 100

Rear bumper and licence plate.

Parts supplied:-

Rear licence plate
rear bumper
screws


Take the skirt from issue 99 and line up the two pins on the rear of the licence plate with the two holes in the skirt. Fix the licence plate to the skirt using two MP03 screws then fix the skirt to the rear of the body assembly using four MD02 screws.

Take the bumper and insert the four pins into the skirt and push home then check the pins on the two arms are located in the correct position.

Open the hood and remove the battery cover from the battery box. Insert three LR44 or AG13 1.5V battery's [Not included] into the battery box making sure the positive end faces the spring holder then replace the battery box cover.

Open the drivers door and push the switch on the dash board down this should make the front and rear lights come on.

Pushing the brake pedal will make the rear lights shine more.

Pushing the accelerator will make the engine rev up.

Pushing the cobra button in the centre of the steering wheel will sound the horn.

Congratulations you have completed the assembly of your 1967 Shelby GT-500.
arpurchase attached the following image(s):
PB184640.JPG
PB184642.JPG
PB184643.JPG
PB184645.JPG
PB184647.JPG
PB184649.JPG
PB184651.JPG
PB184662.JPG
PB184664.JPG
PB184666.JPG
PB184668.JPG
PB184669.JPG
PB184670.JPG
PB184672.JPG
PB184676.JPG
PB184678.JPG
PB184680.JPG
PB184681.JPG
PB184683.JPG
PB184685.JPG
PB184691.JPG
PB184667.JPG
Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .

Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.153 seconds.
DeAgostini