Welcome Guest Search | Active Topics | Log In | Register

Yamaha YZR M1, 1/4, DeAgostini Options
Ruda
#1 Posted : 09 October 2020 17:09:38

Rank: Pro
Red Medal: Red MedalBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 08/02/2016
Posts: 151
Points: 506
Location: Česká Republika
I am starting the construction of the Yamaha YZR M1 model in 1/4 scale from the DeAgostini company.
I was very much looking forward to this construction and thanks to my health rest and vacation, I decided to start building.
As usual, I will finish and modify a lot of parts on the model, but you know me 😀😂🤣.
I have a finished model in my head in the exposed state, so I will proceed in the construction as well.
I wish you a nice peek, I believe that you will follow the construction and not reject it.
I started by building a front fork.
It is already sprayed in the kit, but it is very far from reality.
In the photo two, three and four there is an original part on the left, a spray-painted part with a decal according to the original on the right.
I sanded the fork, sprayed it with a black filler and sprayed it with Titanium gold X-31 acrylic paint from Tamiya.
After perfect drying, for about 24 hours I applied three layers of Clear orange X-26 acrylic paint on the fork and painted the whole with semi-matt varnish.
Personally, I am satisfied and I think that the result has shifted to reality as I imagined.
The next step was to spray the two fork bars and assemble the right and left legs.
That's all for today, I'll see you again soon.








CaptnBirdseye
#2 Posted : 09 October 2020 17:58:40

Rank: Elite

Active Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered, Official Builds

Joined: 10/05/2010
Posts: 2,269
Points: 6,506
Location: Lincolnshire
BigGrin Nice start Ruda, with improvements over the original! (Unsure Ummm....wonder if i can retro-steal your ideas Wink Laugh )
Great to see another Rossi Bike started on the Forum ThumpUp

Regards
Gray
Ruda
#3 Posted : 09 October 2020 18:57:58

Rank: Pro
Red Medal: Red MedalBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 08/02/2016
Posts: 151
Points: 506
Location: Česká Republika
CaptnBirdseye wrote:
BigGrin Nice start Ruda, with improvements over the original! (Unsure Ummm....wonder if i can retro-steal your ideas Wink Laugh )
Great to see another Rossi Bike started on the Forum ThumpUp

Regards
Gray



I am glad that I can present the building here on the forum.
The use of the same method is a matter of course. We are modelers and we have to help each other.
Ruda
#4 Posted : 11 October 2020 08:36:18

Rank: Pro
Red Medal: Red MedalBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 08/02/2016
Posts: 151
Points: 506
Location: Česká Republika
I put the front fork in the set and started working on the engine.
The engine parts are silver in the kit, so they went through a bath in lye, spraying a surfacer and re-spraying it so that it was as close as possible to reality.
At the time of drying, I sprayed the valve cover with blue paint and after drying it painted black and silver details.







alemo
#5 Posted : 11 October 2020 10:09:20

Rank: Pro
Red Medal: Red MedalBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 11/03/2010
Posts: 234
Points: 734
Location: Whelpley Hill, Chesham
Very nice detailing.

Alec
Built: Bluenose, Arab Dhow, HMS Bounty, Hummer H1, D51, Spitfire,E type Jaguar.
In Progress: HMS Victory, , Yamaha YZR-M1

Adapt, improvise, overcome.
Ruda
#6 Posted : 12 October 2020 10:10:55

Rank: Pro
Red Medal: Red MedalBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 08/02/2016
Posts: 151
Points: 506
Location: Česká Republika
I have assembled the whole engine and I am very happy with it, it looks wonderful.
All parts, except for a few details, are spray-painted, both because of the color shade and mainly because of the dividing planes, which I really wouldn't want on the model.











roymattblack
#7 Posted : 12 October 2020 12:02:34

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered, Moderator, Administrators, Global Forum Support

Joined: 04/06/2011
Posts: 2,911
Points: 8,888
Location: ipswich
Great work. It's looking really impressive.
Lovely to see another one of these being built.
Keep it coming.BigGrin
Ruda
#8 Posted : 16 October 2020 10:20:58

Rank: Pro
Red Medal: Red MedalBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 08/02/2016
Posts: 151
Points: 506
Location: Česká Republika
The continuation of the construction is here.
I spray-painted the frame and painted a few details.
I adjusted and folded the rear silencer, the instrument panel and started playing with the airbox and electronics.
The kit is quite pathetic in terms of electronics and I will finish a lot of electronics and cabling parts on my own.
But that can't decide us as a modeler and we usually like to make these details very happy BigGrin BigGrin BigGrin .







Markwarren
#9 Posted : 17 October 2020 09:13:31

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Administrators, Global Forum Support, Registered, Moderator, Official Builds

Joined: 04/01/2016
Posts: 5,227
Points: 15,976
Location: Northamptonshire, England
Very nice work and great start.Love

Mark
Ruda
#10 Posted : 17 October 2020 10:54:23

Rank: Pro
Red Medal: Red MedalBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 08/02/2016
Posts: 151
Points: 506
Location: Česká Republika
The continuation of the construction of Rossi Yamaha YZR M1 is here.
I put the engine in the frame, added an airbox with electronics and lo and behold, there won't be much to see from the engine 😀😂🤣.
But the whole looks really impressive.¨






Ruda
#11 Posted : 18 October 2020 14:30:56

Rank: Pro
Red Medal: Red MedalBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 08/02/2016
Posts: 151
Points: 506
Location: Česká Republika
Yesterday's and today's work on the exhaust was quite successful.
The parts of the exhaust are made of metal in a kit, sprayed with silver paint, all of which are studded with dividing planes and all the parts are screwed together and the screw heads are in visible places.
I screwed all the parts together, I screwed the holes with screws and all the joints with epoxy and after five hours of drying they sanded everything.
I sprayed the whole with a black surfacer from Gunz and let the whole dry thoroughly overnight.
In the morning, I sprayed everything with Alclad II paint of various shades and then shaded everything lightly blue.
I added lambdasondes and the exhaust is ready for installation.









Ruda
#12 Posted : 20 October 2020 15:37:47

Rank: Pro
Red Medal: Red MedalBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 08/02/2016
Posts: 151
Points: 506
Location: Česká Republika
I adjusted, sprayed and patinated the radiator assembly.
I mounted the exhaust in place, followed immediately by the hoses, pipes, and radiator assembly.
It's starting to fill up for us :).













Markwarren
#13 Posted : 20 October 2020 16:19:38

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Administrators, Global Forum Support, Registered, Moderator, Official Builds

Joined: 04/01/2016
Posts: 5,227
Points: 15,976
Location: Northamptonshire, England
Excellent update, really look good.Love Love Drool

Mark
Ruda
#14 Posted : 23 October 2020 10:26:02

Rank: Pro
Red Medal: Red MedalBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 08/02/2016
Posts: 151
Points: 506
Location: Česká Republika
Complete cables for lambda probes, painted brake cylinder and everything in place.
I assembled the handlebars and tentatively mounted them on a fork.









Ruda
#15 Posted : 25 October 2020 18:02:08

Rank: Pro
Red Medal: Red MedalBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 08/02/2016
Posts: 151
Points: 506
Location: Česká Republika
I folded the front and rear wheels and ground the tires.
The connection of the molds on the tires was noticeable and very rough and manual grinding was not enough. I made a fixture and gripped the wheel in a drill, then grinding one poem.
I sprayed the discs and indicated their slight wear.
Subsequently, I dismounted and adjusted the rear swing fork, and after the paint had dried completely, it was screwed onto the frame assembly with the motor.













Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.135 seconds.
DeAgostini