Welcome Guest Search | Active Topics | Log In | Register

Ford Shelby Mustang Official Build Diary - Issues 93-96 Options
davetwin
#1 Posted : 23 October 2017 19:09:04

Rank: Super-Elite
Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalOutstanding Build: An award for an outstanding build
Groups: Registered

Joined: 27/01/2014
Posts: 5,063
Points: 15,180
Issue 93

Ventilation Panel & Wiper Assembly

Parts content:


Top Ventilation Panel
1.8x3.5mm Screws
2.3x4mm Screws

Retrieve the windscreen wipers supplied with the previous stage. Take the windscreen wiper marked R, and fit it into the hole in the ventilation panel.

Hold the windscreen wiper in position and secure it to the panel with a 1.8x3.5mm.

Insert the left windscreen wiper into the other hole in the panel. Secure the left wiper with another 1.8x3.5mm screw.

Insert the tab at the front of the top ventilation panel into the space behind the hood. Lower the back of the panel until it sits flush with the rest of the body.

Hold the panel in place and turn the body over. Secure the panel with two 2.3x4mm screws.

Issue complete, carefully store any remaining parts in an issue labelled bag.
davetwin attached the following image(s):
P1040287.JPG
P1040430.JPG
P1040431.JPG
P1040433.JPG
P1040434.JPG
P1040435.JPG
P1040437.JPG
davetwin
#2 Posted : 23 October 2017 19:10:36

Rank: Super-Elite
Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalOutstanding Build: An award for an outstanding build
Groups: Registered

Joined: 27/01/2014
Posts: 5,063
Points: 15,180
Issue 94

Rear Window

Parts content:


Rear Window

You can’t fit the rear window yet, but you can do a test fit to see where it fits.

The rear window follows the lines of the body.

Issue complete, carefully store any remaining parts in an issue labelled bag.
davetwin attached the following image(s):
P1040438.JPG
P1040439.JPG
P1040441.JPG
davetwin
#3 Posted : 23 October 2017 19:11:52

Rank: Super-Elite
Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalOutstanding Build: An award for an outstanding build
Groups: Registered

Joined: 27/01/2014
Posts: 5,063
Points: 15,180
Issue 95

Rear Window Frame And Aerial

Parts content:


Rear Window Frame
Aerial
1.2x3mm screws

Place the rear window into the space at the rear of the body.

Now take the rear window frame, and locate the fixing tabs around the edge. These will secure the frame to the body. Align the frame with the space in the body, over the rear window, with the fixing tabs facing towards the body.

Press the tabs at the rear of the frame into the body. Then press the side tabs into their holes, and finally, the three top tabs.

Now take the aerial, and insert it into the hole in the body. Hold the aerial in place, turn the body over, and secure the aerial from the inside with a 1.2x3mm screw.

Issue complete, carefully store any remaining parts in an issue labelled bag.
davetwin attached the following image(s):
P1040442.JPG
P1040443.JPG
P1040444.JPG
P1040446.JPG
P1040447.JPG
P1040448.JPG
P1040449.JPG
davetwin
#4 Posted : 23 October 2017 19:13:05

Rank: Super-Elite
Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalOutstanding Build: An award for an outstanding build
Groups: Registered

Joined: 27/01/2014
Posts: 5,063
Points: 15,180
Issue 96

Door Frames & Steps

Parts content:


Right Door Upper Frame
Right Door Step
Left Door Upper Frame
Left Door Step
2.3x3mm Screws

Note: The information provided in the magazine relating to hinge brackets is incorrect - ignore it. The hinge brackets were updated for the UK release and the ones in issues 10 and 14 are correct.

Locate the pins on the right door upper frame. Align the pins on the frame with the corresponding holes in the opening for the right door in the body. Push the pins into the holes until the frame is flush.

Take the right door step and hold it with the curved part towards the rear. Push the pins on the underside of the step into the corresponding holes in the body.

Follow the same steps to mount the left door upper frame and the left door step.

Issue complete, carefully store any remaining parts in an issue labelled bag.
davetwin attached the following image(s):
P1040451.JPG
P1040452.JPG
P1040455.JPG
P1040456.JPG
P1040457.JPG
P1040458.JPG
P1040459.JPG
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.113 seconds.
DeAgostini