Welcome Guest Search | Active Topics | Log In | Register

Rossi Yamaha YZR-M1 Official Build Diary - Pack 4 (UK) Options
Spal
#1 Posted : 19 August 2018 00:16:31

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red Medal
Groups: Official Builds, Registered

Joined: 19/06/2013
Posts: 4,369
Points: 12,915
Location: West Yorkshire
Pack 4 contains parts for stages 13-16

Stage 13

Contents: Exhaust manifold C, Exhaust manifold D, Type B screws

Take exhaust manifolds C and D, and locate the areas where they join, Insert the posts into the holes to join the two manifolds before tightening a screw
into the aligned hole of manifold C to secure them together.

Stage complete, carefully store any remaining parts in a stage labelled bag.


Spal attached the following image(s):
IMGL0675.JPG
IMGL0676.JPG
IMGL0677.JPG
IMGL0678.JPG
IMGL0679.JPG
Spal
#2 Posted : 19 August 2018 00:18:11

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red Medal
Groups: Official Builds, Registered

Joined: 19/06/2013
Posts: 4,369
Points: 12,915
Location: West Yorkshire
Stage 14

Contents: Lambda probe and L1 tension springs, Exhaust pipe, Lambda probe and L2 tension springs, Lambda probe and R1 tension springs, Type B screws, Tension springs, Lambda probe and R2 tension springs

Prepare the left manifolds (A and B), assembled in Stage 12, and Lambda probe and tension springs L1 and L2.Take tension spring L1 and insert the two pins into the two holes in manifold B. You don’t need to use glue, just carefully push the pins fully into the holes.Now insert lambda probe L1 into the hole in manifold B. Push the probe lightly until it’s flush with the manifold. Repeat this to fit the L2 tension spring and lambda probe to the indicated holes in manifold A.
Prepare the right manifolds (C and D), assembled in Stage 13, as well as Lambda probe and tension springs R1 and R2.Push the pins of tension spring R1 into the corresponding holes in manifold D, before inserting the end of lambda probe R1 into manifold D next to the tension spring.Now fit the R2 tension spring and lambda probe into the holes in manifold C.

Stage complete, carefully store any remaining parts in a stage labelled bag.


Spal attached the following image(s):
IMGL0681.JPG
IMGL0682.JPG
IMGL0686.JPG
IMGL0688.JPG
IMGL0689.JPG
IMGL0690.JPG
IMGL0691.JPG
IMGL0693.JPG
IMGL0694.JPG
IMGL0695.JPG
IMGL0696.JPG
IMGL0697.JPG
Spal
#3 Posted : 19 August 2018 00:20:27

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red Medal
Groups: Official Builds, Registered

Joined: 19/06/2013
Posts: 4,369
Points: 12,915
Location: West Yorkshire
Stage 15

Contents: Head cover, Cover plate, Type B screws

Take the right manifolds (C and D), and insert the end into the exhaust pipe. Push the left manifolds (A and B) into the exhaust pipe, on top of the right manifolds.Tighten a screw into the hole to secure the manifolds together.Turn the assembly over and having aligned the inner holes of the manifolds, insert a screw into the hole and tighten it to join the manifolds together. Place one of the tension springs over the join between the manifolds and the exhaust pipe before fitting the second tension spring onto the other side of the assembly.

Stage complete, carefully store any remaining parts in a stage labelled bag.

Spal attached the following image(s):
IMGL0698.JPG
IMGL0699.JPG
IMGL0700.JPG
IMGL0701.JPG
IMGL0702.JPG
IMGL0703.JPG
IMGL0704.JPG
IMGL0705.JPG
IMGL0706.JPG
IMGL0707.JPG
Spal
#4 Posted : 19 August 2018 00:22:28

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red Medal
Groups: Official Builds, Registered

Joined: 19/06/2013
Posts: 4,369
Points: 12,915
Location: West Yorkshire
Stage 16

Contents: Instrument panel, Instrument screen, Lights panel

You will need the head cover, cover plate and the type B screws from Stage 15.Place the cover plate onto the head cover, in the position shown. Turn the cover over, and tighten two type B screws into the holes.Turn the instrument panel over, and press the lights into position on the panel before turning the instrument panel back over again, and pushing the instrument screen into its space in the panel.

Stage complete, carefully store any remaining parts in a stage labelled bag.


You can view the official video build for this pack here

https://www.youtube.com/...2oaId8WuxTv&index=4
Spal attached the following image(s):
IMGL0710.JPG
IMGL0711.JPG
IMGL0712.JPG
IMGL0713.JPG
IMGL0714.JPG
IMGL0715.JPG
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.146 seconds.
DeAgostini