Welcome Guest Search | Active Topics | Log In | Register

Rossi Yamaha YZR-M1 Official Build Diary - Pack 5 (USA Options
Spal
#1 Posted : 19 August 2018 14:44:03

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red Medal
Groups: Official Builds, Registered

Joined: 19/06/2013
Posts: 4,369
Points: 12,915
Location: West Yorkshire
Pack 5 contains parts for stages 17-20

Stage 17

Contents: Instrument panel support,Right connector plate,Left connector plate,Bracket,Type J screws,Screw heads

Place the left connector plate (marked L) inside the instrument panel support, pushing the plate in as far as it will go.Repeat this with the right connector plate to the other side of the support. Retrieving the instrument panel from stage 16,insert the tab on the bracket into the space at the bottom of the panel.Turn the panel over, and secure the bracket to it with a type J screw.Insert the two screw heads into the holes in the instrument panel and place the instrument
panel support into the back of the panel.

Stage complete, carefully store any remaining parts in a stage labelled bag.

Spal attached the following image(s):
IMGL0814.JPG
IMGL0815.JPG
IMGL0816.JPG
IMGL0817.JPG
IMGL0818.JPG
IMGL0819.JPG
IMGL0820.JPG
IMGL0821.JPG
IMGL0822.JPG
IMGL0823.JPG
IMGL0824.JPG
IMGL0825.JPG
IMGL0826.JPG
IMGL0827.JPG
IMGL0828.JPG
IMGL0829.JPG
Spal
#2 Posted : 19 August 2018 14:47:55

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red Medal
Groups: Official Builds, Registered

Joined: 19/06/2013
Posts: 4,369
Points: 12,915
Location: West Yorkshire
Stage 18

Contents: Radiator (back),Radiator (front),Radiator plate,Radiator cap,Left radiator pipe,Right radiator pipe,Type I screws

Place the left radiator pipe along the left edge of the radiator back, aligning the holes of both parts before tightening the two type I screws into the aligned holes to secure the pipe in place.Insert the two pins on the back of the radiator plate into the two holes in the right radiator pipe.Press the radiator cap into position on the right radiator pipe.Place the right radiator pipe on the right side of the radiator back, and secure it with two type I screws.Take the radiator front and press it into the rear part.

Stage complete, carefully store any remaining parts in a stage labelled bag.

Spal attached the following image(s):
IMGL0832.JPG
IMGL0833.JPG
IMGL0835.JPG
IMGL0836.JPG
IMGL0837.JPG
IMGL0838.JPG
IMGL0839.JPG
IMGL0840.JPG
IMGL0841.JPG
IMGL0842.JPG
IMGL0843.JPG
IMGL0844.JPG
IMGL0845.JPG
IMGL0846.JPG
IMGL0847.JPG
IMGL0849.JPG
Spal
#3 Posted : 19 August 2018 14:55:24

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red Medal
Groups: Official Builds, Registered

Joined: 19/06/2013
Posts: 4,369
Points: 12,915
Location: West Yorkshire
Stage 19

Contents: Radiator (back),Radiator (front),Radiator left side,Radiator right side,Fixing plate,Pipe connector,Type K screws

Place the radiator left side onto the radiator back, pressing the circled holes onto the pins. Repeat this for the radiator right side.Insert the fixing plate into the cutout at the narrow end of the radiator back then align the two posts on the radiator front with those in the radiator back, pressing them into place.Press the pipe connector onto the radiator left side


Stage complete, carefully store any remaining parts in a stage labelled bag.


Spal attached the following image(s):
IMGL0850.JPG
IMGL0851.JPG
IMGL0852.JPG
IMGL0853.JPG
IMGL0854.JPG
IMGL0855.JPG
IMGL0856.JPG
IMGL0857.JPG
IMGL0858.JPG
IMGL0859.JPG
IMGL0860.JPG
IMGL0861.JPG
IMGL0862.JPG
IMGL0863.JPG
Spal
#4 Posted : 19 August 2018 14:58:38

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red Medal
Groups: Official Builds, Registered

Joined: 19/06/2013
Posts: 4,369
Points: 12,915
Location: West Yorkshire
Stage 20

Contents: Airbox top,Large cable guide,Small cable guide,Stops x 2

Retrieving both radiator assemblies carefully connect the two together ensuring the two sets of holes are aligned on both sides of the assembly.Then tighten type K screws into the aligned holes to fix the radiator parts together.

Stage complete, carefully store any remaining parts in a stage labelled bag.


You can view the official video build for this pack here

https://www.youtube.com/...JUIkfyoZco-rCEsGom94e6WX
Spal attached the following image(s):
IMGL0865.JPG
IMGL0866.JPG
IMGL0867.JPG
IMGL0868.JPG
IMGL0869.JPG
IMGL0870.JPG
IMGL0871.JPG
IMGL0872.JPG
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.122 seconds.
DeAgostini