Welcome Guest Search | Active Topics | Log In | Register

Zuy9o Options
Zuy9o
#1 Posted : 06 December 2019 14:05:16

Rank: Beginner Level 1

Groups: Registered

Joined: 06/12/2019
Posts: 5
Points: 5
There was a problem ! Scroll mechanism when opening and closing the manipulator ! And the bottom somehow twitches at the same time all and when you open it comes to the stop and begins to scroll and when you close the same ! ???

Tell ME what to do what is the problem ? Opens all the way and closes then starts to scroll !




Markwarren
#2 Posted : 07 December 2019 09:39:08

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding build
Groups: Administrators, Global Forum Support, Registered, Moderator, Official Builds

Joined: 04/01/2016
Posts: 4,555
Points: 13,954
Location: Northamptonshire, England
Your mechanism for the arms don’t look right, here is a picture of mine for reference.

Mark
Markwarren attached the following image(s):
photo 07-12-2019, 8 34 37 am.jpg
Zuy9o
#3 Posted : 30 December 2019 11:02:36

Rank: Beginner Level 1

Groups: Registered

Joined: 06/12/2019
Posts: 5
Points: 5
It doesn't read the code so I can't connect to Wi Fi? What to do?
20 minutes of sitting , even the lens removed ! But on direct connects video shooting and photo goes! So the camera works... Confused Confused
skyfire
#4 Posted : 30 December 2019 12:02:11

Rank: Pro

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published Medal
Groups: Registered

Joined: 20/01/2011
Posts: 384
Points: 1,069
Location: Canberra, Australia
Zuy9o wrote:
It doesn't read the code so I can't connect to Wi Fi? What to do?
20 minutes of sitting , even the lens removed ! But on direct connects video shooting and photo goes! So the camera works... Confused Confused


What have you tried to get it to read the code ??

As in changing light conditions and moving the code closer or further away from the lens ?

Also have you tried looking at the R2D2 troubleshooting guide ?
https://forum.model-spac...aspx?g=posts&t=32756
Namaste - R.I.P. Eva, CF took you far too early, I will never forget you!!! - "The greatest thing you will ever learn, is just to love and be loved in return -- Moulin Rouge" Love Love Love - R.I.P. Gran, I will love you always. - Life is not measured by the number of breaths we take, but by the moments that take our breath away. - Fear does not stop death. It stops life. - Vivir con miedo es como vivir a medias - A life lived in fear is a life half lived.
Zuy9o
#5 Posted : 30 December 2019 17:05:23

Rank: Beginner Level 1

Groups: Registered

Joined: 06/12/2019
Posts: 5
Points: 5
Yes, moving away and approaching ! no result . And not only I have in group already man 6 wrote about this . Indeed there is no here on forum !
skyfire
#6 Posted : 31 December 2019 11:40:07

Rank: Pro

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published Medal
Groups: Registered

Joined: 20/01/2011
Posts: 384
Points: 1,069
Location: Canberra, Australia
A thread where someone had a similar problem and they ended up getting in touch with C/S for a new pcb card.

https://forum.model-spac...aspx?g=posts&t=32738
Namaste - R.I.P. Eva, CF took you far too early, I will never forget you!!! - "The greatest thing you will ever learn, is just to love and be loved in return -- Moulin Rouge" Love Love Love - R.I.P. Gran, I will love you always. - Life is not measured by the number of breaths we take, but by the moments that take our breath away. - Fear does not stop death. It stops life. - Vivir con miedo es como vivir a medias - A life lived in fear is a life half lived.
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.132 seconds.
DeAgostini